Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

Re-finish needed please!
http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=4796
Page 1 of 1

Author:  clavin [ Sun Jan 29, 2006 1:17 am ]
Post subject: 

I have a friend with a 20 year old Guild D-55.
It's a nice guitar, but the finish is literally at this point lifting off the peghead in a lot of spots, and other areas. It's pretty yellow so I would assume given the age, color it's nitro.

He needs the whole guitar re-finished along with some inlay I am doing for him.

He's not worried about it being old, etc../ collectible.

Anyone out there available, and with quotes?
I assume it needs some fretwork and a setup as well.
Please let me know if your interested.
Thanks!
PM me or,
clavin@handcraftinlay.com



Author:  Michael Dale Payne [ Sun Jan 29, 2006 3:50 am ]
Post subject: 

Graig will ktm9 do or does your cient require nitro or cat poly. If ktm 9 , French polish or nito is ok could we work out a barter on a batch of logos? PM meMichaelP38746.4939930556

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/